The original Top-O-Matic (TOM) is a Chinese made Supermatic clone. Its not as well made as the Supermatic and there is captain black tobacco no noticeable difference in functionality between the two machines. The machines are, for the most part, identical.
I got my last parts from Arbro.com (now gone) and have yet to try RYOParts.com [link].In reply to the title. I’ve had a plastic cutter in my TOM for years and it has worked quite well. It’s a TOM w/ handle so I had to cut a matching slot in the cutter with an x-acto saw.
You are responsible for any state and local taxes which may be due. BuyLittleCigars.com sells Little Cigars, Filtered Cigars, Domestic Cigars, Premium Cigars, and Smoking Accessories. BuyPipeTobacco.com does not sell cigarettes. BuyPipeTobacco.com sells Little Cigars, Filtered Cigars, Domestic Cigars, Premium Cigars, and Smoking Accessories.
We used Top O Matic, and we must say we are extremely impressed with the quality, as well as the affordability. The instructions that come with the machine were easy to follow and made replacing parts very easy. When we used the machine, we knew that we were using a high-quality machine that was going to last a while. Hold the stability handle with your left hand while grabbing the hand crank with your right hand. Pull the crank back, in a clockwise motion, until it has reached as far as it will allow; it should stop just short of the tobacco chamber. It isn’t a piece of junk; if you follow the instructions on how to fill the chamber on the machine.
Make sure you map out how you took it apart and how it goes back together or you might be in for some puzzle time. First time i took it apart i was all like, These are not that many parts.. captain black tobacco Thank god i had a second one to look at or i might have been there for awhile playing puzzle time. These states include Vermont, Arkansas, Illinois, Iowa, Maine, Utah, and Washington.
Then sometimes the serrated push rod likes to stick out and just snap back a lot. When all this start happening I just disassemble the who thing and scrub everything off with alcohol then hot water. After the parts are shiny clean and new looking i put it back together.
The machine features an easy-to-use plate that can be removed to change this machine from making king-size cigarettes to making 100mm cigarettes. It features a metal handle and metal hold-down for easy operation. Consistently creates perfectly packed cigarettes. Top O Matic Cigarette Roll Machine by Top O Matic, is a stainless steel chrome coated rolling machine. Similar in style to the T2 Top O Matic, but smaller in size. This unit is very compatible to use with both King Size and 200 mm-sized filtering tubes.
The top holes of the PS ‘H’ linkage (with its harder post and stronger rivets) need to be a tad bigger (6mm). The PS aluminum cutter is a bit thinner (.005″) and needs brass shim stock laminated to the bottom, the new PS plastic cutter is only a few thousandths smaller and works just fine. The PS spoon/mounting screw set fits and works fine.
Personally, I don’t like either of them.All your other points are related to gunk buildup. Anyone who has taken apart a TOM knows its not immune. The reason its not as much of an issue with the TOM is because the cutter/compressor fits looser. While the ideal is a well mated snug fit (e.g. Excel), its just not possible to get that kind of accuracy/consistency with sheet-metal (why there are ‘good’ and ‘bad’ Supermatics). The rugged metal construction of this Limited Edition Topomatic is just the start of all the great features of this amazing machine.