Coleman Lantern Parts & Models

The globe is embossed Coleman and Pyrex Reg US Pat Off Made in U.S.A. on the back (not shown). The globe is stabilized in the frame by an upper plate (middle image) and lower spring clips (upper right image). Takao Kimura, whose collection this is in, and I believe this is Model 216, one of three lanterns noted in the Coleman Shipping Records coleman canopy a couple of months after the 7 9 date. Coleman also made these LZ327 (left) and LZ427 (right) lanterns, known here by their Coleman numbers, for several retailers including Sears and Montgomery Ward. These lanterns have a separate post to support the burner; the air tube, which is curved in these models, opens below the mantles.

I found the cheapest price to be at Walmart, for around $1.84 each. Place your finger over the hole in the air intake tube where the generator just came out of. Use an air compressor to blow-out the burner assembly by holding the air nozzle under the burner cap(s) and blowing air up into the lantern. This will clear dirt and insect nests out of the tubes.

Remove the fuel filler cap and pour all the old fuel into an approved container for disposal. You can find a local hazardous waste recycling facility by doing an internet search. Thanks for supporting our efforts to ensure that the primary filming location of Friday the 13th, Part 1 is around for generations to come. Most orders are shipped within 48 hours, but may occasionally be delayed a few days. Shipping times quoted are the approximate delivery time once your package reaches the shipping carrier.

This model was produced for 10 years beginning in 1954 For the first couple of years the burner cap was ceramic. The lantern coleman sleeping bag on the left is in Jim Fulmer’s collection. Monte Dodge’s 202, running (right), is dated Mar. ’57 and has a metal burner cap.

This one, in Patrick Fay’s collection, is dated April, 1948, and has the original globe on which Coleman appears in large faint green letters. This was the last version to have a nickel plated brass fount and the pump is held in by two small screws, not a spring clip. The brass sided, green painted fount is also characteristic of that time.