Yves Grenard (†2012), second cousin of captain black tobacco Pierre Comoy headed the company from 1971. He was responsible for Chapuis Comoy’s recovering its independance from Comoy. His son Antoine Grenard took over the direction of the company in 2007.
Puff your peterson pipes pipe slowly and steadily to get a soft smoke without heating the pipe. The tobacco must be packed regularly to maintain a moderate puff and prevent the pipe from gurgling. An average pipe usually lasts 40 minutes (the world record in slow smoking is more than three hours!). If your pipe gets blocked, let it cool down and take another one. Graduated from a Design University, he creates several new models ( Sphère, Vulcano, Monza… ) all modern shapes with keeping the renowned know-how and quality of the CHACOM pipes. Christie Handmade Pipes are hand crafted right in Waynesboro, Pennsylvania with world class craftsmanship by Pipemaker Eric E. Christie.
Surely, if you have been smoking a pipe for a while you have no doubt reached the point where you want to try something that’s off the beaten path. So in this guide, the team at Paykoc Pipes will set our sights far afield in order to track down some of the rarest pipe tobaccos that are commercially available, somewhere. Antoine has made it his mission to significantly revise the design of the pipes and increase the quality without neglecting the roots and core business. So Chacom is still in demand today as a supplier for pre-turned bowls, mouthpieces and the execution of complete production processes. Several tens of thousands of pre-turned bowls from old brands that have been taken over are still stored in the factory. Every now and then a series with these bowls comes on the market and enjoys great popularity.
From the pictures below, it is amply evident that I did not achieve the exact consistency I desired, but no issues, it still worked!!! Since the beginning of my journey into the beautiful and challenging world of pipe refurnishing, I am being faced with problem relating to glue. Maybe the hot temperate climate prevalent here is causing issues or the quality of glue itself is an issue. However notwithstanding the issues of glue, I was able to prepare a mixture of CA superglue and activated charcoal and applied it to the surface.
The brand of the pipe was marked on the bowl – ‘Chacom coin osseu’. For a beginner, who most of the time is a dummy, reading all the posts in different forums to learn a general procedure how to do the work is extremely important. In rebornpipes I found a lot of information and suggestions on how to proceed. I prepared a fresh mixture of CA glue and activated charcoal and applied it to area to be filled.
The stem was very damaged with a bite through on the top side and much chewing around the edges of the stem. The bowl is very dirty with little room in the bowl – thick cake and lots of overflow on to the back side of the rim.I reamed the bowl with reamers. I cleaned the mortise, and the airway in the shank and stem with pipe cleaners and alcohol. You can see what the bowl looks like now in the next two photos.